XVP-1801
HD/SD Up/Down/Crossconverter with AFD
The Densité Series XVP-1801 is a high-quality, HD/SD up/down/crossconverter and video/audio signal processor, with AFD support and background keying. The superior conversion quality of the XVP at both 50 and 59.94 Hz stems from multiple technologies, including advanced motion adaptive de-interlacing and anti-ringing. To ensure that up/downconverted television is presented in the correct aspect ratio when aired, the XVP module supports AFD (Active Format Description) SMPTE ST 2016. This provides automatic aspect ratio control using embedded control commands, and prevents on-air aspect ratio errors such as the postage stamp effect. In addition to AFD, the XVP also supports VLI (Video Line Index)...
FEATURES
- Up/down/cross/ARC converter with frame sync
- Advanced adaptive video de-interlacing for higher image quality
- Automatic detection of film sequences
- Automatic ARC, using AFD (SMPTE ST 2016), VLI (RP-186) and WSS detection and correct re-insertion with the output
- Custom and fixed ARC presets
- Background keying capability during up or down conversion which allows side panels or letterbox black bars to be filled with video or graphic
- Built-in proc amp, color correction and legalizer
- Processes and converts ancillary data such as CC (608/708) and timecode
- Perfect audio/video synchronization plus additional audio fixed delay of up to 2 seconds
- Optional 16 channels of embedded full audio processing, shuffling and downmixing
- Optional 4 AES inputs and 4 AES outputs
- Dolby E compatible
- Audio metadata processing (SMPTE ST 2020-A)
- Compatible with Grass Valley audio processing cards, including the UAP-1783, AAP-174 and DAP-1781
- Multiple presets for save and recall
- RS-422 protocol and GPI ports for automation or external device control
- Thumbnail and ALM streaming over IP
SPECIFICATIONS
Video Inputs (2)
Signal:
- SD: SMPTE ST 259-C (270 Mb/s)
- HD: SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
Supported formats:
- SD: SMPTE ST 125: 480i59.94
- SD: EBU: 576i50
- HD: SMPTE ST 274: 1080i59.94/50
- HD: SMPTE ST 296: 720p59.94/50
Embedded audio: SMPTE ST 299-272
Cable length:
- 340m (1,115 ft.) Belden 1694A at 270 Mb/s
- 150m (492 ft.) Belden 1694A at 1.485 Gb/s
Return loss: >15 dB up to 1.5 GHz
Video Output
Signal:
- SMPTE ST 259-C (270 Mb/s)
- SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
Supported formats:
- SD: 480i59.94, 576i50
- HD: SMPTE ST 274: 1080i59.94/50
- HD: SMPTE ST 296: 720p59.94/50
Embedded audio: SMPTE ST 299, SMPTE ST 272
Return loss: >15 dB up to 1.5 GHz
Jitter: HD/SD: <0.2 UI
Reference Input
Signal:
- SMPTE ST 170/SMPTE ST 318/ITU 624-4/BUT 470-6 blackburst
- SMPTE ST 274M/SMPTE ST 296 tri-level sync (black)
Return loss: >35 dB up to 5.75 MHz
Video Processing Performance
Signal path: 10 bits
Latency:
- 1 frame in all modes
- Up to 6 frames of additional delay can be added
Audio Digital Inputs (4)
Sampling freq.: 32 to 96 kHz
Quantization: Up to 24 bits
AES3
- Level: 0.2 to 7 Vp-p
- Impedance: 110Ω balanced
AES3-id
- Level: 0.2 to 2 Vp-p
- Impedance: 75Ω
Return loss: 15 dB at 6 MHz
Audio Digital Outputs (4)
Sampling freq.: 48 kHz
Quantization: 24 bits
AES3
- Level: 3 Vp-p
- Impedance: 110Ω balanced
AES-3id
- Level: 1.0 Vp-p
- Impedance: 75Ω
Return loss: 15 dB at 6 MHz
Audio Processing Performance
Quantization: 24 bits
Sampling: 48 kHz
Number of channels: 16 (4 groups)
Freq. response: ±0.02 dB (20 Hz to 20 kHz)
SNR: 123 dB (A weighted)
THD+N: -138 dB (20 Hz to 20 kHz)
Miscellaneous
Fixed delay: 0 to 2.0s
Step: 1 ms (coarse), 1 sample (fine)
GPI (8)
Connector: 15-pin D-Sub, opto-isolated
GPI in:
- Input selection: 1, 2
- Presets: 1, 2, 3, 4
GPI out: Provides status of selected input: 1 or 2
RS-422 (automation)
Connector: RJ45
Signal: OXTEL Series automation protocol
ABUS Connector
As per ABUS standard, Grass Valley
Test Pattern Generator
Video: Color bars — 100% white bar with 75% color
Audio:
- Left channel pulsed 1 kHz tone
- Right channel steady 1 kHz tone
Electrical
Power: 17W
MEDIA GALLERY
ORDERING INFORMATION
Densité 2 frame | Densité 3 frame | Description | |
XVP-1801 | XVP-1801-3RU | HD/SD universal video processor | |
XVP-1801-75-3DRP | Double rear connector panel, 75Ω | ||
XVP-1801-110-3DRP | Double rear connector panel, 110Ω | ||
XVP-1801-75-QRP | Quadruple rear connector panel, 75Ω | ||
XVP-1801-110-QRP | Quadruple rear connector panel, 110Ω | ||
Options (software) | Description | ||
XVP-1801-OPT-K | Background key input option | ||
XVP-1801-OPT-AUD16 | AES IO support and 16 channels on-board audio processing option | ||
Options (hardware) | |||
BOC-DE15-4BNC-1 | 75Ω digital audio breakout cable | ||
NSH15M | HD-15 to terminal block adapter | ||
Related products | |||
AAP-1741 | 4 ch. analog audio processor | ||
UAP-1783 | 8 ch. universal audio processor | ||
DAP-1781 | 8 ch. digital audio processor | ||
Remote control | GV Orbit, iControl, iControl Solo |