XIP-3901-JPEG-XS
Multichannel JPEG XS Encode/Decode SMPTE ST 2110 Application for XIP-3911 and XIP-3901
The XIP-3901-JPEG-XS application supports multiple channels of HD and UHD encoding/decoding between SMPTE ST 2110-20 uncompressed video and SMPTE ST 2110-22 high-quality compressed video using the JPEG XS standard. The application provides a low-latency encoding side. An optional SMPTE ST 2110 stream alignment is available on the decoding side to match production studio equipment top-of-frame reference, if needed. Network connectivity is enabled with dual 25 GbE I/O for full SMPTE ST 2022-7 redundancy.
Based on open standards, this IP edge application is compliant with the SMPTE ST 2110 suite of standards and the JT-NM TR-1001 technical recommendation for easy integration in a broadcast...
FEATURES
- Independent multi-channel JPEG XS UHD/HD video encoder/decoder
- Ultra-low latency codec based on IntoPix’s ISO standardized JPEG XS transported over ST 2110-22
- User selectable compression ratio from 6:1 to 36:1. (6:1 is nearly-lossless, 10:1 is visually lossless.)
- Support HD (720p/1080i/1080p) and 4K UHD (2160p) video resolutions.
- 3 operating modes available that optimizes number of encoding/decoding paths:
- 2 HD/UHD encoders and 2 HD/UHD decoders
- 8 HD encoders
- 8 HD decoders
- XIP-3911 and XIP-3901 applications supporting ST-2110 suite of standard and JT-NM TR-1001 on dual 25GigE IP media network interfaces:
- SMPTE ST 2110-20/21 video outputs with associated SMPTE ST 2110-40 metadata streams
- SMPTE ST 2110-30/31 Level A, B, C (up to 16 channels) audio stream
- SMPTE ST 2022-7 Class A & D seamless protection switching of IP streams
- SMPTE ST 2059-1 & -2 precision time protocol with best master clock algorithm
- Support unicast and multicast signals
- JT-NM TR-1001-1 compliant including in-band or out-of-band control of NMOS IS-04/IS-05
- Support of DHCP, LLDP and DNS-SD for easy IP configuration
- Media interfaces supports AOC cable, Short and Long Reach fiber.
- Supports FEC74 (CL74 Fire Code) and FEC108 (Reed Solomon IEEE) Forward Error Correction
- 12G 2160p, 3G 1080p and HD 1080i/720p SDI output available on the decoder paths.
- Complete integration with GV Orbit for configuration, control and monitoring.
- HTML5 web-based configuration interface
- Open configuration management & monitoring with the Rest API
- Individual XIP-3911 and XIP-3901 applications licensed, purchased as needed
- Rapid switching between XIP-3911 applications
SPECIFICATIONS
SDI Outputs
Physical: 8 used HD-BNC output connectors
SDI Standards:
SMPTE ST 292 (1.485, 1.485/1.001 Gb/s)
SMPTE ST 424 (2.970, 2.970/1.001 Gb/s)
SMPTE ST 2082-1:2015 (out 1 & 5)
Supported output formats:
HD: SMPTE ST 274: 1080i59.94, 1080i50
HD: SMPTE ST 296: 720p59.94, 720p50
3G: SMPTE ST 425 level A (mapping 1): 1080p59.94, 1080p50
12G: SMPTE ST 2082-10: 2160p59.94, 2160p50
Jitter:
HD/SD: <0.2 UI (alignment jitter)
3G: <0.3 UI (alignment jitter)
12G: <0.3 UI (alignment jitter)
Ethernet Port for Media
Physical: Two SFP28 sockets for active optical cable, short- and
long-reach fiber
Standard: IEEE 802.3-2008 25 GbE
Performance: Up to 25 Gb of streaming per direction
Ethernet Port for Control
Physical: One electrical RJ45 port
Standard: IEEE 802.3 1000 Mb/s
Video Processing Performance
Signal path: 10 bits minimum
Electrical
Power: 60W maximum
MEDIA GALLERY
ORDERING INFORMATION
Application Software
XIP-3901-JPEG-XS
Multichannel JPEG XS Encode/Decode ST-2110 Application
Densité 3+ Frame
XIP-3911
Agile SDI/IP processing platform
XIP-3911-3+DRP-H
Double rear panel for Densité 3+ with HD-BNC
SFP+ Options
One or two SFP+ are needed to run this application
SFP-25G-SR
SFP28 25GBASE optical transceiver MMF
SFP-25G-LR
SFP28 25GBASE optical transceiver SMF